ReimageAny Challenges

If ReimageAny is not imaging a PC properly, two BIOS settings are the usual culprits.

SATA Mode: Switch RAID to AHCI

ReimageAny does not work when the drive is set to RAID mode for SATA operation. Many manufacturers (Dell most notably) ship computers configured for RAID. To fix this, enter the BIOS and switch the SATA mode from RAID to AHCI. AHCI is generally a better overall fit for these machines.

Secure Boot Can Block Imaging

Secure Boot can prevent ReimageAny from running on some computers. If Secure Boot stops the imaging attempt, enter the BIOS and temporarily disable it. After imaging, you can re-enable Secure Boot if you prefer.

Common Questions

ReimageAny won’t start on a new Dell — what’s wrong?
The drive is probably in RAID mode. Switch SATA mode to AHCI in BIOS.

Imaging is blocked immediately at boot — why?
Secure Boot may be arresting it. Temporarily disable Secure Boot in BIOS.

Can I turn Secure Boot back on afterward?
Yes. Re-enable it after imaging if you want.

ReimageAny Challenges

If ReimageAny won't image a PC, check the drive's SATA mode (RAID vs AHCI) and Secure Boot in BIOS.